La Tinkeria Blog

Search This Blog

Photo Blog Day 8: Saw Dudes Go To Home Depot

Posted by Elliott Conely on January 18, 2019

Get link
Facebook
X
Pinterest
Email
Other Apps

Elliott Conely

Mr. Grisbee

Woodworking

1/18/2019

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

Week 1 Blog - 2D 3D Design

Francesco Argentina Jeremy Grisbee 2D-3D Design J-Term 1/15/18 Blog 1 Week one of this J-Term was all about gathering materials and getting the proper measurements prior to doing any real cuts. For my two projects, I decided to try and make a clock for my bedroom, as well as a chair that could be taken apart and put back together. For these two items, I would be utilizing the laser cutter, and the CNC Router respectively. As I said, the main goal for this week was just to establish a plan, and prepare all of the cuts that needed to be made for the following class time. And although I did make a few cuts this week, such as the pieces for the chair, as well as a few rectangular test cuts, the majority of my time was spent getting familiar with Adobe Illustrator. For my two projects to be successful, everything had to be as precise as possible with little room for error. This is why I made the test cuts, I had to make sure each rectangle for my connector pieces fit exactl...

J-Term: Advanced 2D and 3D Design

Asa Forman Mr. Grisbee J-Term: Advanced 2D and 3D Design 14 January 2018 P 3 R 1 O 1 G 2 R 1 E 1 S 1 S 1 I saw a guy spill his Scrabble set on the road. I asked him “what’s the word on the street?” I would like to preface this blog post by saying that this J-Term will most likely go down in the history books of The Post Oak High School as one of, if not the, shortest J-Terms to ever transpire. Initially, after Hurricane Harvey and several months of deliberation, the high school faculty decided that it would be necessary to have an Odyssey trip. They decided that the trip would be most conveniently rescheduled to the last week of J-term for undisclosed reasons, and that J-Term would be cut short by three days to accommodate the Odyssey. This was fine by all J-Terms, however, and the adaption to less time went relatively smoothly ( I think this was due to students’ eagerness to spend three days on Galveston Island). The J-Term was then cut short another two day...

Saw : Dude :: Free : Bird

Elliott drilling holes for the bolts that will connect the steel support beams to the brackets mounted on the walls in the locker hallway. After applying the final polycrylic coat, the butcher block is left to air-dry on the saw horses. Nathan is an absolute mad lad. Saw Dudes are out!

Powered by Blogger

Photo Blog Day 8: Saw Dudes Go To Home Depot

Comments

Post a Comment